www.JoepeeSoft.com, powered by Rob F.M. van den Brink

Home

Publications

Papers
Standardisation

Presentations, DSL
Presentations, Quantum
Patents
PhD Thesis
Test Suite

DSL-Corner

LineCodes DSL
Bandplans VDSL

Quantum-Corner

What is Quantum computing

About me

Biography
Google Scholar

The Netherlands
www.joepeesoft.com

DSL-Corner: Bandplans for VDSL

Summary

The ITU standard for VDSL2 has defined numerous frequency allocation plans and many of them cannot co-exist in the same cable. If you do, the performance of VDSL2 may drop significantly. This is because upstream and downstream are strictly separated in different bands (an approach called FDD - Frequency Devision Duplexing). Below you will find a graphic representation of all variants being defined for Europa and North America If you click your mouse on each of these graphic bars, you will see the associated variant within such a frequency allocation.

Frequency allocation plans for region A (North America), derived from bandplan "998"
Frequency allocation plans for region B (Europe), using band plan "997"
Frequency allocation plans for region B (Europe), using band plan "998"

An inside joke from the people who were involved in creating this standard is that in the end (after years of discussion) each operator/country got its own frequency plan. If you count the number of plans below you may wonder why this is only a joke.

[SHOW-ALL] [HIDE-ALL]

Frequency allocations for region A (North America)

Click on each frequency allocation plot to toggle for more information

A-(8,E-32):			D1	U1	D2
			0.138	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-32)	TPL.up:VDSL2-(8a,EU-32)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-32)	TPL.up:VDSL2-(8b,EU-32)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-32)	TPL.up:VDSL2-(8c,EU-32)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-32)	TPL.up:VDSL2-(8d,EU-32)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,ADL-32):		D1	U1	D2
		0.138	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-32)	TPL.up:VDSL2-(8a,ADLU-32)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-32)	TPL.up:VDSL2-(8b,ADLU-32)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-32)	TPL.up:VDSL2-(8c,ADLU-32)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-32)	TPL.up:VDSL2-(8d,ADLU-32)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,E-48):			D1	U1	D2
			0.207	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-48)	TPL.up:VDSL2-(8a,EU-48)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-48)	TPL.up:VDSL2-(8b,EU-48)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-48)	TPL.up:VDSL2-(8c,EU-48)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-48)	TPL.up:VDSL2-(8d,EU-48)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,ADL-48):		D1	U1	D2
		0.207	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-48)	TPL.up:VDSL2-(8a,ADLU-48)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-48)	TPL.up:VDSL2-(8b,ADLU-48)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-48)	TPL.up:VDSL2-(8c,ADLU-48)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-48)	TPL.up:VDSL2-(8d,ADLU-48)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,E-64):			D1	U1	D2
			0.276	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-64)	TPL.up:VDSL2-(8a,EU-64)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-64)	TPL.up:VDSL2-(8b,EU-64)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-64)	TPL.up:VDSL2-(8c,EU-64)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-64)	TPL.up:VDSL2-(8d,EU-64)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,ADL-64):		D1	U1	D2
		0.276	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-64)	TPL.up:VDSL2-(8a,ADLU-64)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-64)	TPL.up:VDSL2-(8b,ADLU-64)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-64)	TPL.up:VDSL2-(8c,ADLU-64)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-64)	TPL.up:VDSL2-(8d,ADLU-64)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,E-128):			D1	U1	D2
			0.552	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-128)	TPL.up:VDSL2-(8a,EU-128)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-128)	TPL.up:VDSL2-(8b,EU-128)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-128)	TPL.up:VDSL2-(8c,EU-128)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-128)	TPL.up:VDSL2-(8d,EU-128)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(8,ADL-128):		D1	U1	D2
		0.552	3.75	5.2	8.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(8a,D-128)	TPL.up:VDSL2-(8a,ADLU-128)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8b,D-128)	TPL.up:VDSL2-(8b,ADLU-128)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8c,D-128)	TPL.up:VDSL2-(8c,ADLU-128)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2-(8d,D-128)	TPL.up:VDSL2-(8d,ADLU-128)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)

A-(12,E-32):			D1	U1	D2	U2
			0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-32)	TPL.up:VDSL2-(12a,EU-32)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-32)	TPL.up:VDSL2-(12b,EU-32)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,ADL-32):		D1	U1	D2	U2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-32)	TPL.up:VDSL2-(12a,ADLU-32)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-32)	TPL.up:VDSL2-(12b,ADLU-32)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,E-48):			D1	U1	D2	U2
			0.207	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-48)	TPL.up:VDSL2-(12a,EU-48)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-48)	TPL.up:VDSL2-(12b,EU-48)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,ADL-48):		D1	U1	D2	U2
		0.207	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-48)	TPL.up:VDSL2-(12a,ADLU-48)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-48)	TPL.up:VDSL2-(12b,ADLU-48)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,E-64):			D1	U1	D2	U2
			0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-64)	TPL.up:VDSL2-(12a,EU-64)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-64)	TPL.up:VDSL2-(12b,EU-64)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,ADL-64):		D1	U1	D2	U2
		0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-64)	TPL.up:VDSL2-(12a,ADLU-64)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-64)	TPL.up:VDSL2-(12b,ADLU-64)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,E-128):			D1	U1	D2	U2
			0.552	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-128)	TPL.up:VDSL2-(12a,EU-128)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-128)	TPL.up:VDSL2-(12b,EU-128)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(12,ADL-128):		D1	U1	D2	U2
		0.552	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(12a,D-128)	TPL.up:VDSL2-(12a,ADLU-128)	profile 12a: → (dn=14.5dBm, up<=14.5dBm, US0=required)
TPL.dn:VDSL2-(12b,D-128)	TPL.up:VDSL2-(12b,ADLU-128)	profile 12b: → (dn=14.5dBm, up<=14.5dBm, US0=unused)

A-(17,E-32):			D1	U1	D2	U2	D3
			0.138	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-32)	TPL.up:VDSL2-(17a,EU-32)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,ADL-32):		D1	U1	D2	U2	D3
		0.138	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-32)	TPL.up:VDSL2-(17a,ADLU-32)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,E-48):			D1	U1	D2	U2	D3
			0.207	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-48)	TPL.up:VDSL2-(17a,EU-48)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,ADL-48):		D1	U1	D2	U2	D3
		0.207	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-48)	TPL.up:VDSL2-(17a,ADLU-48)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,E-64):			D1	U1	D2	U2	D3
			0.276	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-64)	TPL.up:VDSL2-(17a,EU-64)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,ADL-64):		D1	U1	D2	U2	D3
		0.276	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-64)	TPL.up:VDSL2-(17a,ADLU-64)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,E-128):			D1	U1	D2	U2	D3
			0.552	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-128)	TPL.up:VDSL2-(17a,EU-128)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(17,ADL-128):		D1	U1	D2	U2	D3
		0.552	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(17a,D-128)	TPL.up:VDSL2-(17a,ADLU-128)	profile 17a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

A-(30,E-32):			D1	U1	D2	U2	D3	U3
			0.138	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-32)	TPL.up:VDSL2-(30a,EU-32)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,ADL-32):		D1	U1	D2	U2	D3	U3
		0.138	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-32)	TPL.up:VDSL2-(30a,ADLU-32)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,E-48):			D1	U1	D2	U2	D3	U3
			0.207	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-48)	TPL.up:VDSL2-(30a,EU-48)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,ADL-48):		D1	U1	D2	U2	D3	U3
		0.207	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-48)	TPL.up:VDSL2-(30a,ADLU-48)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,E-64):			D1	U1	D2	U2	D3	U3
			0.276	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-64)	TPL.up:VDSL2-(30a,EU-64)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,ADL-64):		D1	U1	D2	U2	D3	U3
		0.276	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-64)	TPL.up:VDSL2-(30a,ADLU-64)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,E-128):			D1	U1	D2	U2	D3	U3
			0.552	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-128)	TPL.up:VDSL2-(30a,EU-128)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

A-(30,ADL-128):		D1	U1	D2	U2	D3	U3
		0.552	3.75	5.2	8.5	12	23	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2-(30a,D-128)	TPL.up:VDSL2-(30a,ADLU-128)	profile 30a: → (dn=14.5dBm, up<=14.5dBm, US0=optional)

Frequency allocations for region B (Europe), using band plan "997"

Click on each frequency allocation plot to toggle for more information

997-M1c-A-7

B7-1:		D1	U1	D2
		0.138	3	5.1	7.05	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-1-(8c,997-M1c-A-7)	TPL.up:VDSL2.B7-1-(8c,997-M1c-A-7)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)

997-M1x-M-8

B7-2, (8x):		D1	U1	D2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-2-(8a,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(8a,997-M1x-M-8)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-2-(8b,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(8b,997-M1x-M-8)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-2-(8c,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(8c,997-M1x-M-8)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-2-(8d,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(8d,997-M1x-M-8)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 7.05 MHz is not used, but the mask allows for signal components up to 12 MHz.

997-M1x-M-8

B7-2, (12x):		D1	U1	D2	U2	U2x
		0.276	3	5.1	7.05	8.832	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-2-(12a,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(12a,997-M1x-M-8)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-2-(12b,997-M1x-M-8)	TPL.up:VDSL2.B7-2-(12b,997-M1x-M-8)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)
NOTE: The PSD above 8.832 MHz should be considered preliminary. Reduction of the mask in the band from 8.832 to 12 MHz has been left for further study.

997-M1x-M

B7-3, (8x):		D1	U1	D2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-3-(8a,997-M1x-M)	TPL.up:VDSL2.B7-3-(8a,997-M1x-M)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-3-(8b,997-M1x-M)	TPL.up:VDSL2.B7-3-(8b,997-M1x-M)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-3-(8c,997-M1x-M)	TPL.up:VDSL2.B7-3-(8c,997-M1x-M)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-3-(8d,997-M1x-M)	TPL.up:VDSL2.B7-3-(8d,997-M1x-M)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 7.05 MHz is not used, but the mask allows for signal components up to 12 MHz.

997-M1x-M

B7-3, (12x):		D1	U1	D2	U2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-3-(12a,997-M1x-M)	TPL.up:VDSL2.B7-3-(12a,997-M1x-M)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-3-(12b,997-M1x-M)	TPL.up:VDSL2.B7-3-(12b,997-M1x-M)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

997-M2x-M-8

B7-4, (8x):		D1	U1	D2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-4-(8a,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(8a,997-M2x-M-8)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-4-(8b,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(8b,997-M2x-M-8)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-4-(8c,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(8c,997-M2x-M-8)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-4-(8d,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(8d,997-M2x-M-8)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 7.05 MHz is not used, but the mask allows for signal components up to 12 MHz.

997-M2x-M-8

B7-4, (12x):		D1	U1	D2	U2	U2x
		0.276	3	5.1	7.05	8.832	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-4-(12a,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(12a,997-M2x-M-8)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-4-(12b,997-M2x-M-8)	TPL.up:VDSL2.B7-4-(12b,997-M2x-M-8)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)
NOTE: The PSD above 8.832 MHz should be considered preliminary. Reduction of the mask in the band from 8.832 to 12 MHz has been left for further study.

997-M2x-A

B7-5, (8x):		D1	U1	D2
		0.138	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-5-(8a,997-M2x-A)	TPL.up:VDSL2.B7-5-(8a,997-M2x-A)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-5-(8b,997-M2x-A)	TPL.up:VDSL2.B7-5-(8b,997-M2x-A)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-5-(8c,997-M2x-A)	TPL.up:VDSL2.B7-5-(8c,997-M2x-A)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-5-(8d,997-M2x-A)	TPL.up:VDSL2.B7-5-(8d,997-M2x-A)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 7.05 MHz is not used, but the mask allows for signal components up to 12 MHz.

997-M2x-A

B7-5, (12x):		D1	U1	D2	U2
		0.138	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-5-(12a,997-M2x-A)	TPL.up:VDSL2.B7-5-(12a,997-M2x-A)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-5-(12b,997-M2x-A)	TPL.up:VDSL2.B7-5-(12b,997-M2x-A)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

997-M2x-M

B7-6, (8x):		D1	U1	D2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-6-(8a,997-M2x-M)	TPL.up:VDSL2.B7-6-(8a,997-M2x-M)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-6-(8b,997-M2x-M)	TPL.up:VDSL2.B7-6-(8b,997-M2x-M)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-6-(8c,997-M2x-M)	TPL.up:VDSL2.B7-6-(8c,997-M2x-M)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-6-(8d,997-M2x-M)	TPL.up:VDSL2.B7-6-(8d,997-M2x-M)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 7.05 MHz is not used, but the mask allows for signal components up to 12 MHz.

997-M2x-M

B7-6, (12x):		D1	U1	D2	U2
		0.276	3	5.1	7.05	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-6-(12a,997-M2x-M)	TPL.up:VDSL2.B7-6-(12a,997-M2x-M)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B7-6-(12b,997-M2x-M)	TPL.up:VDSL2.B7-6-(12b,997-M2x-M)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

HPE17-M1-NUS0

B7-7:		D2	U2	D3
		7.05	10.125	14	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-7-(17a,HPE17-M1-NUS0)	TPL.up:VDSL2.B7-7-(17a,HPE17-M1-NUS0)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

HPE30-M1-NUS0

B7-8:		D2	U2	D3	U3	D4
		7.05	10.125	14	21.45	24.89	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-8-(30a,HPE30-M1-NUS0)	TPL.up:VDSL2.B7-8-(30a,HPE30-M1-NUS0)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

997E17-M2x-A

B7-9:		D1	U1	D2	U2	D3	U3
		0.138	3	5.1	7.05	12	14	17.664	19.5	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-9-(17a,997E17-M2x-A)	TPL.up:VDSL2.B7-9-(17a,997E17-M2x-A)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 19.5 MHz.

997E30-M2x-NUS0

B7-10:		D1	U1	D2	U2	D3	U3	D4	U4
		0.138	3	5.1	7.05	12	14	19.5	27	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B7-10-(30a,997E30-M2x-NUS0)	TPL.up:VDSL2.B7-10-(30a,997E30-M2x-NUS0)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

Frequency allocations for region B (Europe), using band plan "998"

Click on each frequency allocation plot to toggle for more information

998-M1x-A

B8-1, (8x):		D1	U1	D2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-1-(8a,998-M1x-A)	TPL.up:VDSL2.B8-1-(8a,998-M1x-A)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-1-(8b,998-M1x-A)	TPL.up:VDSL2.B8-1-(8b,998-M1x-A)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-1-(8c,998-M1x-A)	TPL.up:VDSL2.B8-1-(8c,998-M1x-A)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-1-(8d,998-M1x-A)	TPL.up:VDSL2.B8-1-(8d,998-M1x-A)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M1x-A

B8-1, (12x):		D1	U1	D2	U2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-1-(12a,998-M1x-A)	TPL.up:VDSL2.B8-1-(12a,998-M1x-A)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-1-(12b,998-M1x-A)	TPL.up:VDSL2.B8-1-(12b,998-M1x-A)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M1x-B

B8-2, (8x):			D1	U1	D2
			0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-2-(8a,998-M1x-B)	TPL.up:VDSL2.B8-2-(8a,998-M1x-B)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-2-(8b,998-M1x-B)	TPL.up:VDSL2.B8-2-(8b,998-M1x-B)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-2-(8c,998-M1x-B)	TPL.up:VDSL2.B8-2-(8c,998-M1x-B)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-2-(8d,998-M1x-B)	TPL.up:VDSL2.B8-2-(8d,998-M1x-B)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M1x-B

B8-2, (12x):			D1	U1	D2	U2
			0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-2-(12a,998-M1x-B)	TPL.up:VDSL2.B8-2-(12a,998-M1x-B)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-2-(12b,998-M1x-B)	TPL.up:VDSL2.B8-2-(12b,998-M1x-B)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M1x-NUS0

B8-3, (8x):		D1	U1	D2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-3-(8a,998-M1x-NUS0)	TPL.up:VDSL2.B8-3-(8a,998-M1x-NUS0)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-3-(8b,998-M1x-NUS0)	TPL.up:VDSL2.B8-3-(8b,998-M1x-NUS0)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-3-(8c,998-M1x-NUS0)	TPL.up:VDSL2.B8-3-(8c,998-M1x-NUS0)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-3-(8d,998-M1x-NUS0)	TPL.up:VDSL2.B8-3-(8d,998-M1x-NUS0)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M1x-NUS0

B8-3, (12x):		D1	U1	D2	U2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-3-(12b,998-M1x-NUS0)	TPL.up:VDSL2.B8-3-(12b,998-M1x-NUS0)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M2x-A

B8-4, (8x):		D1	U1	D2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-4-(8a,998-M2x-A)	TPL.up:VDSL2.B8-4-(8a,998-M2x-A)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-4-(8b,998-M2x-A)	TPL.up:VDSL2.B8-4-(8b,998-M2x-A)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-4-(8c,998-M2x-A)	TPL.up:VDSL2.B8-4-(8c,998-M2x-A)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-4-(8d,998-M2x-A)	TPL.up:VDSL2.B8-4-(8d,998-M2x-A)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M2x-A

B8-4, (12x):		D1	U1	D2	U2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-4-(12a,998-M2x-A)	TPL.up:VDSL2.B8-4-(12a,998-M2x-A)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-4-(12b,998-M2x-A)	TPL.up:VDSL2.B8-4-(12b,998-M2x-A)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M2x-M

B8-5, (8x):		D1	U1	D2
		0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-5-(8a,998-M2x-M)	TPL.up:VDSL2.B8-5-(8a,998-M2x-M)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-5-(8b,998-M2x-M)	TPL.up:VDSL2.B8-5-(8b,998-M2x-M)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-5-(8c,998-M2x-M)	TPL.up:VDSL2.B8-5-(8c,998-M2x-M)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-5-(8d,998-M2x-M)	TPL.up:VDSL2.B8-5-(8d,998-M2x-M)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M2x-M

B8-5, (12x):		D1	U1	D2	U2
		0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-5-(12a,998-M2x-M)	TPL.up:VDSL2.B8-5-(12a,998-M2x-M)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-5-(12b,998-M2x-M)	TPL.up:VDSL2.B8-5-(12b,998-M2x-M)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M2x-B

B8-6, (8x):			D1	U1	D2
			0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-6-(8a,998-M2x-B)	TPL.up:VDSL2.B8-6-(8a,998-M2x-B)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-6-(8b,998-M2x-B)	TPL.up:VDSL2.B8-6-(8b,998-M2x-B)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-6-(8c,998-M2x-B)	TPL.up:VDSL2.B8-6-(8c,998-M2x-B)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-6-(8d,998-M2x-B)	TPL.up:VDSL2.B8-6-(8d,998-M2x-B)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M2x-B

B8-6, (12x):			D1	U1	D2	U2
			0.276	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-6-(12a,998-M2x-B)	TPL.up:VDSL2.B8-6-(12a,998-M2x-B)	profile 12a: → (dn=14.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-6-(12b,998-M2x-B)	TPL.up:VDSL2.B8-6-(12b,998-M2x-B)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998-M2x-NUS0

B8-7, (8x):		D1	U1	D2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-7-(8a,998-M2x-NUS0)	TPL.up:VDSL2.B8-7-(8a,998-M2x-NUS0)	profile 8a: → (dn=17.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-7-(8b,998-M2x-NUS0)	TPL.up:VDSL2.B8-7-(8b,998-M2x-NUS0)	profile 8b: → (dn=20.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-7-(8c,998-M2x-NUS0)	TPL.up:VDSL2.B8-7-(8c,998-M2x-NUS0)	profile 8c: → (dn=11.5dBm, up=14.5dBm, US0=required)
TPL.dn:VDSL2.B8-7-(8d,998-M2x-NUS0)	TPL.up:VDSL2.B8-7-(8d,998-M2x-NUS0)	profile 8d: → (dn=14.5dBm, up=14.5dBm, US0=required)
NOTE: The PSD above 8.5 MHz is not used, but the mask allows for signal components up to 12 MHz.

998-M2x-NUS0

B8-7, (12x):		D1	U1	D2	U2
		0.138	3.75	5.2	8.5	12	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-7-(12b,998-M2x-NUS0)	TPL.up:VDSL2.B8-7-(12b,998-M2x-NUS0)	profile 12b: → (dn=14.5dBm, up=14.5dBm, US0=unused)

998E17-M2x-NUS0

B8-8:		D1	U1	D2	U2	U3	D3
		0.138	3.75	5.2	8.5	12	14	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-8-(17a,998E17-M2x-NUS0)	TPL.up:VDSL2.B8-8-(17a,998E17-M2x-NUS0)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

998E17-M2x-NUS0-M

B8-9:		D1	U1	D2	U2	U3	D3
		0.276	3.75	5.2	8.5	12	14	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-9-(17a,998E17-M2x-NUS0-M)	TPL.up:VDSL2.B8-9-(17a,998E17-M2x-NUS0-M)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

998ADE17-M2x-NUS0-M

B8-10:		D1	U1	D2	U2	D3
		0.276	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-10-(17a,998ADE17-M2x-NUS0-M)	TPL.up:VDSL2.B8-10-(17a,998ADE17-M2x-NUS0-M)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

998ADE17-M2x-A

B8-11:		D1	U1	D2	U2	D3
		0.138	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-11-(17a,998ADE17-M2x-A)	TPL.up:VDSL2.B8-11-(17a,998ADE17-M2x-A)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

998ADE17-M2x-B

B8-12:			D1	U1	D2	U2	D3
			0.276	3.75	5.2	8.5	12	17.664	21	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-12-(17a,998ADE17-M2x-B)	TPL.up:VDSL2.B8-12-(17a,998ADE17-M2x-B)	profile 17a: → (dn=14.5dBm, up=14.5dBm, US0=optional)
NOTE: The PSD above 17.664 MHz is not used, but the mask allows for (filtered) signal components up to 21 MHz.

998E30-M2x-NUS0

B8-13:		D1	U1	D2	U2	U3	D3	U4	D4
		0.138	3.75	5.2	8.5	12	14	21.45	24.89	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-13-(30a,998E30-M2x-NUS0)	TPL.up:VDSL2.B8-13-(30a,998E30-M2x-NUS0)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

998E30-M2x-NUS0-M

B8-14:		D1	U1	D2	U2	U3	D3	U4	D4
		0.276	3.75	5.2	8.5	12	14	21.45	24.89	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-14-(30a,998E30-M2x-NUS0-M)	TPL.up:VDSL2.B8-14-(30a,998E30-M2x-NUS0-M)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

998ADE30-M2x-NUS0-M

B8-15:		D1	U1	D2	U2	D3	U3
		0.276	3.75	5.2	8.5	12	24.89	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-15-(30a,998ADE30-M2x-NUS0-M)	TPL.up:VDSL2.B8-15-(30a,998ADE30-M2x-NUS0-M)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

998ADE30-M2x-NUS0-A

B8-16:		D1	U1	D2	U2	D3	U3
		0.138	3.75	5.2	8.5	12	24.89	30

LT-model(s) - downstream	NT-model(s) - upstream	Comments
TPL.dn:VDSL2.B8-16-(30a,998ADE30-M2x-NUS0)	TPL.up:VDSL2.B8-16-(30a,998ADE30-M2x-NUS0)	profile 30a: → (dn=14.5dBm, up=14.5dBm, US0=optional)

(Validate HTML en CSS) (oude site)

created by: Rob F.M. van den Brink